Lenovo Secure Managed Client - Manual (Page 44)

15.
Align the two holes at the back of the boot drive module with the two chassis
pins. Push until seated properly. Secure the boot drive module to the chassis
with the single screw previously removed.
16.
Re-install brace assembly in enclosure (see 1 in the following figure). Secure
brace assembly to enclosure by tightening the two captive screws (see 2 ).
Figure 40. Connecting power cable to boot drive module backplane
Figure 41. Re-installing boot drive module
36 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide