Lenovo ThinkServer TD340 User Manual

Page 133

Advertising
background image

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the removal procedure, go to “Completing the parts replacement” on page 205. As the

onboard SATA or SAS software RAID 5 is not available without the TR 100 or TR 300 Key, you might need
to reconfigure RAID for your server. See “Configuring RAID” on page 72.

Installing or removing the ThinkServer Management Module Premium

This topic provides instructions on how to install or remove the ThinkServer Management Module Premium
(hereinafter referred to as the TMM Premium).

The TMM Premium offers convenient, remote KVM access and control through the LAN or Internet. You
can use the TMM Premium to gain location-independent remote access to respond to critical incidents and
to undertake necessary maintenance. Therefore, working as an integrated solution in your server, the
TMM Premium provides an increased level of manageability over the basic server management available.
You can purchase a TMM Premium from Lenovo.

Installing the TMM Premium

Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii
and “Guidelines” on page 83.

This topic provides instructions on how to install the TMM Premium.

Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.

Notes:

• Use any documentation that comes with the TMM Premium and follow those instructions in addition to

the instructions in this topic.

• Depending on the model, your server might look slightly different from the illustration in this topic.

To install the TMM Premium, do the following:

1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all

power cords from electrical outlets and disconnect all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 85.

3. Lay the server on its side for easier operation.

4. Touch the static-protective package that contains the TMM Premium to any unpainted surface on the

outside of the server. Then, take the TMM Premium out of the package.

Chapter 6

.

Installing, removing, or replacing hardware

121

Advertising