Lenovo ThinkServer TD340 - Manual (Page 137)

5. Locate the TPM connector on the system board, and then insert the TPM into the TPM connector.
Figure 67. Installing the TPM
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 205. Then, you can
configure the TPM function in the Setup Utility program. See “Configuring the TPM function” on page 66.
Removing the ThinkServer Trusted Platform Module
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 83.
This topic provides instructions on how to remove the TPM if your server has one installed.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• If you remove the TPM, the TPM function will be unavailable.
• Use any documentation that comes with the TPM and follow those instructions in addition to the
instructions in this topic.
Chapter 6 . Installing, removing, or replacing hardware 125