Lenovo ThinkServer TD340 - Manual (Page 60)

The following table provides information about the recommended power connector and system board SATA
connector for the non-hot-swap hard disk drive installed in each drive bay. See “Server components” on
page 28 and “System board components” on page 48 for the location information about the hard disk drive
bays and SATA connectors on the system board.
Non-hot-swap hard disk drive Power connector System board SATA connector
Installed in bay 0 P9 power connector SATA connector 0
Installed in bay 1 P10 power connector SATA connector 1
Installed in bay 2 P7 power connector SATA connector 2
Installed in bay 3 P8 power connector SATA connector 3
System board components
The following illustration shows the component locations on the system board.
Figure 29. System board components
1 System fan 3 connector 21 SATA connector 4
2 Microprocessor socket 2 22 SAS connector 4-7
3 Microprocessor 2 fan connector 23 SAS connector 0-3
4 Microprocessor 2 power connector 24 Internal USB Type A connector
5 Memory slots (6) 25 TMM Premium connector
6 Main power connector 26 TPM connector
7 Power Management Bus (PMBus) connector 27 Intelligent Diagnostics Module connector
8 Microprocessor socket 1 28 Front panel connector
48 ThinkServer TD340 User Guide and Hardware Maintenance Manual