Lenovo ThinkServer TD340 User Manual
Page 61
9
System fan 2 connector
29
Internal USB connector 5-6
10
Microprocessor 1 fan connector
30
Internal USB connector 7-8
11
Microprocessor 1 power connector
31
System board battery
12
Platform Controller Hub (PCH)
32
Internal serial connector
13
iButton socket
33
PCI card slot (PCI slot 1)
14
System fan 1 connector
34
PCI Express x8 card slot (PCI-E slot 2)
15
SATA connector 0
35
PCI Express x8 card slot (PCI-E slot 3)
16
SATA connector 1
36
ThinkServer Management Module
17
SATA connector 2
37
PCI Express x8 card slot (PCI-E slot 4)
18
SATA connector 3
38
PCI Express x16 card slot (PCI-E slot 5)
19
SATA SGPIO connector
39
PCI Express x8 card slot (PCI-E slot 6)
20
SATA connector 5
40
Memory slots (6)
1
System fan 3 connector
Used to connect the rear system fan cable.
2
Microprocessor socket 2
8
Microprocessor socket 1
If the server has two microprocessors, each of the microprocessor is secured in the microprocessor
socket on the system board and a heat sink and fan assembly is installed above the microprocessor to
provide cooling. If the server has only one microprocessor, the microprocessor socket 2 is protected by a
microprocessor socket cover.
3
Microprocessor 2 fan connector
Used to connect the heat sink and fan assembly 2 cable.
4
Microprocessor 2 power connector
Used to connect the power connector of the power supply to provide power to the microprocessor installed
in the microprocessor socket 2.
5
Memory slots (6)
40
Memory slots (6)
Your server system board provides 12 memory slots to support up to 12 memory modules. For more
information, see “Memory module installation rules” on page 93.
6
Main power connector
Used to connect the power connector of the power supply to provide main power to your server.
49