Intelligent diagnostics module – Lenovo ThinkServer TD340 User Manual
Page 31
Potential system error (system error LED: amber)
Solution
A power cord has been disconnected or a redundant
power supply has been removed.
1. Ensure that the power supplies are installed securely.
2. Ensure that the power cords are connected securely
to the power supplies.
3. Install a new power supply to replace the removed
one.
The system is overheated.
Check the BMC for errors and then check the system
fans.
6
Front USB connector 1
7
Front USB connector 2
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you
have more than six USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.
Intelligent diagnostics module
This topic provides information about the intelligent diagnostics module (hereinafter referred to as the
IDM) and the diagnostic LEDs on the IDM panel.
Note: The IDM is only available in some models.
19