Hot-swap hard-disk-drive backplane – Lenovo ThinkServer TD340 User Manual
Page 51
The following illustration shows the connectors on the expander card. Each connector on the expander
card is used to connect a mini-SAS to mini-SAS signal cable. For detailed information, see “Connecting
the cables” on page 43.
Figure 20. Expander card
1
Connector 1
4
Connector 4
2
Connector 2
5
Connector 5
3
Connector 3
6
Connector 6
Hot-swap hard-disk-drive backplane
Your server comes with one of the following hot-swap hard disk drive and backplane configurations:
• Up to four 3.5-inch hot-swap SATA or SAS hard disk drives with one backplane
• Five to eight 3.5-inch hot-swap SATA or SAS hard disk drives with two backplanes
• Up to eight 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives with one backplane
• Nine to sixteen 2.5-inch hot-swap SAS hard disk drives or SATA solid-state drives with two backplanes
39