Lenovo ThinkServer TD340 User Manual
Page 193
Advertising
![background image](/manuals/470143/193/background.png)
• For the 2.5-inch hot-swap hard-disk-drive cage, install the six screws to secure the backplane on
the cage.
Figure 124. Installing the 2.5-inch hot-swap hard-disk-drive backplane
Note: If you want to install the following backplane for the 2.5-inch hot-swap hard-disk-drive cage,
ensure that the backplane is secured by the two tabs
1
. Then, install the three screws to secure
the backplane on the cage.
Figure 125. Installing the 2.5-inch hot-swap hard-disk-drive backplane
Installing, removing, or replacing hardware
181
Advertising