Lenovo ThinkServer TD340 - Manual (Page 36)

4 5 Ethernet connectors (RJ-45)
Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you
identify the Ethernet connectivity, activity, and connection speed.
Note: The Ethernet connector 1 (callout 4 ) marked with “MGMT” is for system management. If you want
to use remote management functions, you need to connect an Ethernet cable to the Ethernet connector
1. The Ethernet connector 1 also supports teaming function. If the teaming function is enabled, the TMM
management capability will be disabled.
Figure 8. Ethernet status LEDs
Ethernet status LED Color Status Description
Green On The server is connected to a LAN.
None Off The server is disconnected from a LAN.
1 Right
Green Blinking The LAN is connected and active.
Amber On The connection speed is 1000 Mbps.
Green On The connection speed is 100 Mbps.
2 Left
None Off The connection speed is 10 Mbps.
6 VGA DB-15 connector
Used to attach a VGA-compatible video device, such as a VGA monitor.
7 ID LED
When you press the ID button, the ID LED on the rear of the server is lit to help you locate the server among
other servers. You also can turn on the ID LED using a remote management program for server presence
detection.
ID LED Color Description
On Blue The server is identified.
Off None The ID LED is not in use or the server is not identified.
8 Expansion card area
You server has six expansion slots on the system board for you to install appropriate PCI cards or PCI
Express cards. You also can install a converged network adapter (CNA) into the PCI Express card slot. For
detailed information, see “System board components” on page 48.
24 ThinkServer TD340 User Guide and Hardware Maintenance Manual