Lenovo Secure Managed Client - Manual (Page 60)

Table 6. Light and buzzer interpretations (continued)
LED/buzzer State Related Meaning Action
Constant beep Front operator's panel
fault LED constant on
Failure mode
Troubleshooting
The following sections describe common problems, with possible solutions, which
can occur with your Secure Managed Client (SMC) - Storage Array.
For details on how to remove and replace a module see the Hardware Installation
and Replacement Guide.
System faults
Table 7. System faults
Symptom Cause Action
Audible alarm sounds Internal fault detected (failure of an
internal communications path)
Look for other amber LED
indications on the power supply
units. If there is a PSU error present
there may be a communication
problem with that PSU. Remove and
then reinstall the PSU. If the problem
persists then change the PSU.
Power supply unit faults
Table 8. Power supply unit faults
Symptom Cause Action
1. Front operator's panel unit fault
LED amber
2. Audible alarm sounding
1. Any power fault
2. A thermal condition which could
cause PSU overheating
1. Verify that the AC main
connection to PSU is good.
2. Disconnect the PSU from main
power and remove the PSU from
the power supply cage. Reinstall.
If problem persists, replace PSU.
3. Reduce the ambient temperature
Cooling fan faults
Table 9. Cooling fan faults
Symptom Cause Action
1. Front panel fault LED amber
2. Audible alarm sounding
3. Fan LED is illuminated
1. Any power fault
2. A fan failure
1. Ensure that DC power to cooling
fans is correct and that the LED is
not illuminated
2. Disconnect the PSU from main
power and remove the faulty fan
from the system. Reinstall. If
problem persists, replace PSU.
3. Reduce the ambient temperature
54 Hardware Maintenance Manual