Lenovo Secure Managed Client - Manual (Page 79)

12. If using an optional SATA Disk on Module (DOM), remove the P4 power
cable connected to the DOM’s power adapter cable.
Note: If you are using a SATA DOM device, the P4 power cable is
disconnected from the boot drive module and connected to a SATA
DOM . Power for a USB DOM device is provided by the USB
connector. See “Boot drive options” on page 77.
13. Remove the USB or SATA DOM if one is present.
14. Remove the Intel RAID Controller SRCSATAWB. Disconnect the SAS cable
1 . Release the screw 2 on the retaining bracket at the back of the
enclosure. Lift the Intel RAID Controller SRCSATAWB upwards and out of the
enclosure 3 .
Chapter 8. Features 73