Konica Minolta bizhub C200 - Manual (Page 64)

C200 2-15
Specifying machine functions (software switch settings) 2
SMTP authentication is enabled when the following conditions are met.
- Bit 6 of mode 380 is set to "1".
- When the SMTP authentication user name and password are shared with the POP3 user name and
password, bit 2 of mode 380 is set to "0".
- When the SMTP authentication user name and password are not shared with the POP3 user name and
password, bit 2 of mode 380 is set to "1", and settings for "SMTP Authentication User Name" and
"SMTP Authentication Password" in the Network Settings screen are specified.
- Bit 5, 4 or 3 of mode 380 is set to "1".
!
Detail
For details on specifying SMTP authentication settings for e-mail transmissions, refer to "SMTP TX
Settings" on page 1-12 .
If all e-mail authentication methods are enabled (bits 5, 4 and 3 of mode 380 are set to "1"), they will
have the following priority: CRAM-MD5 authentication (bit 5)
→ LOGIN authentication (bit 4) → PLAIN
authentication (bit 3).
2.4.12 Specifying security settings for e-mail receptions (mode 383)
Specify the security settings for e-mail receptions.
Factory settings
Specifying the settings
During the production of this unit, the settings in the shaded cells were selected.
3 Specify whether or not mail transmission authentication
(PLAIN authentication) is used. 0 Not used
1 Used
2 Specify whether or not the SMTP authentication ID and
password are shared with the POP3 user name and pass-
word. 0 The ID and password are
shared.
1 The ID and password are
not shared.
1 Specify whether or not the HTTP server protocol is used. 0 Not used
1 Used
0 Specify whether or not the SSL protocol is used. 0 Not used
1 Used
Bits Description Settings Details
Bits 7654 3210
Settings 0011 1000 (HEX: 38)
Bits Description Settings Details
7 − 0 *Do not change the setting
for this bit.
6 Specify whether or not mail reception authentication (SMTP
authentication) is used. 0 Not used
1 Used
5 Specify whether or not mail reception authentication (CRAM-
MD5 authentication) is used. 0 Not used
1 Used
4 Specify whether or not mail reception authentication (LOGIN
authentication) is used. 0 Not used
1 Used
3 Specify whether or not mail reception authentication (PLAIN
authentication) is used. 0 Not used
1 Used
2-0 − 000 *Do not change the settings
for these bits.