Olympus D-230 - Manual (Page 109)

16
Macintosh
SAVING IMAGES FROM YOUR CAMERA ON THE PC
This procedure enables you to save images
on the PC (the Hard Disk is used in this manual).
1
Double-click on the [untitled]
icon displayed on the desktop
by connecting the camera to
the PC and open the window.
Note If the [untitled] icon is not displayed, or if an error message is
displayed when you double-click on the [untitled] icon, one of the
following may have occurred:
1 There is a problem with the power supply to the camera (the AC
adapter is not connected properly or the batteries are exhausted).
2 There is no SmartMedia card in the camera or there is a
problem with the SmartMedia card.
Check that you can review images recorded on the
SmartMedia card on the camera’s monitor.
3 There is a problem with the connectivity between the camera
and the PC via the USB cable.
4 Apple “File Exchange” extension is not enabled.
2
Double-click on the [DCIM]
icon and open the folder.
3
Double-click on the
[100OLYMP] icon and open
the folder.
The image files (JPEG files) are
displayed and you can view the icons
(P1010012.JPG, etc.).
Double-click
Double-click
Double-click