Olympus D-230 - Manual (Page 31)

30
RECORDING
FUNCTIONS
FLASH
The flash is designed to fire automatically when the flash setting is AUTO
(default setting) and you take pictures under low light conditions or against
strong backlight. You can change the flash mode to suite different shooting
situations.
1
Open the lens barrier.
The camera turns on in the Record
mode.
2
Press the button.
The monitor shows the current flash
mode.
3
To change the setting, press
the button until the
appropriate flash mode is
displayed.
The mode changes in the
following sequence each time
the button is pressed:
[ ] [ ] [ ] [ ] [ ].
4
Take a picture.
USING THE ARROW PAD