Olympus D-230 - Manual (Page 35)

34
RECORDING
FUNCTIONS
3
When the current Macro mode
display indicates [OFF], press
the button once again.
The Macro mode is set and the
monitor turns on.
4
Take a picture by composing
the subject using the monitor.
Note The Macro mode is canceled when the clear settings value is
[RESET] and the lens barrier is closed. See “Clear settings” (
p.75).
Caution
• When using the Macro mode, keep the distance between the
camera and the subject at a distance of more than 10 cm
(4 in).
• If you try to take a picture at a distance of less than 10 cm
(4 in), the autofocus will not work properly even though the
shutter button is pressed.
• In macro shooting, shadows may be conspicuous or correct
exposure may not be achieved. Always check the images on
the monitor after macro shooting.
USING THE ARROW PAD