Olympus D-230 User Manual
Page 46
45
RECORDING
FUNCTIONS
5
Select [AUTO], [
], [
],
[
] or [
] using the
/
buttons and press the
button.
The white balance setting is now
completed.
Press the
button again to exit the
menu.
6
Take a picture.
Note
• The white balance setting returns to AUTO (default setting)
when the clear settings value is [RESET] and the lens barrier
is closed. See “Clear settings” (
• Under a combination of artificial and natural lighting or under
fluorescent lighting, natural hues may be difficult to achieve on
the AUTO mode.
• To obtain an image coloring that resembles what you see
under incandescent lighting, set the white balance mode to
[
].
Caution
• Under special light source conditions, the white balance
control circuitry may not work completely as intended.
• When the flash is fired with a white balance setting other than
AUTO, be sure to check the color tone on the monitor to
check if the white balance value set is optimal.
• When the flash is fired with a white balance setting other than
AUTO, colors may appear different in the resulting images
from the colors you see on the monitor.
WHITE BALANCE