Olympus D-230 - Manual (Page 11)

10
PREP
ARA
TION
LOADING THE BATTERIES
1
Check the following.
2
Slide the battery compartment
cover toward A and lift it up
in the direction of B.
3
Insert the batteries as shown,
making sure that they are
correctly oriented.
4
Push down the battery
compartment cover in the
direction of C and close firmly
by pressing the mark in
the direction of D until it clicks.
Note • If the camera is left for about 1 hour with the batteries
removed, all the settings will revert to the default settings.
• When powering the camera by batteries, if the batteries start
to run low, the battery indication will be displayed in red. When
the batteries are close to exhaustion, the LCD monitor turns
off and the green lamp and the orange lamp blink
simultaneously.
A
B
D
C
Battery status
Lights (green) Blinks (red)
Adequate power
remaining. Batteries are running
low. Replace with new
batteries. Batteries are completely
exhausted. Replace with
new batteries.
Green and orange lamps blink
No display
The lens barrier
is closed.
The monitor
is off.
The orange
lamp is off.