Olympus D-230 - Manual (Page 76)

75
O
THER
FUNCTIONS
CLEAR SETTINGS
You can choose to keep the shooting-related settings, such as the flash mode
and image quality settings, as they are for the next picture or return to the
default settings when the camera is turned off. If you do not want to change
the settings to suit the weather or subject, select [HOLD] to keep current
settings. This conveniently avoids having to re-enter settings each time the
camera is used (as would be the case if the settings are cleared). For details
of the settings, see “Clear settings value” ( p.76).
1
Open the lens barrier.
The camera turns on in the Record
mode.
2
Press the button.
The monitor shows the Camera
menu.
3
Select [SETUP] using the /
buttons and press the
button.
4
Select [ ] using the /
buttons and press the
button.
5
Select [HOLD] using the /
buttons and press the
button. By selecting [HOLD],
you can keep the current
settings.
Press the button again to exit the
menu.
Note The clear settings remains when the lens barrier is closed.