Barco R9001960 - Manual (Page 101)

B. BARCO Control Manager
B.4.4 Image Settings
How to change
The image settings as Contrast, Brightness, Color, Tint, Sharpness, Phase and Gamma can be changed by :
1. moving with the mouse the slide bar up or down
Or ,
clicking on the up or down arrow on the edges of the slide bar. (image B-8)
A value indication for the setting will be given just below the slide bar of the adjustment.
Changing a setting will have inmediate influence on the displayed image.
Image B-8
While changing one off these image settings with the RCU, the values indicated on the image settings web
page will only be changed after 15 min.
R5976182 BARCOREALITY 6500 30012001 97