3 action, Auto image adjustment, What can be done – Barco R9001960 User Manual
Page 44: When is it disabled, Set up
6. Auto Image Adjustment
6.3 Action
What can be done ?
The action function can be toggled between :
•
full automatic : the best fitting file will be loaded automatically when a source is selected. At the same time the image will be
automatically centered on the active surface of the LCD.
•
on new file : only on a new file, the image will be centered on the active surface of the LCD.
•
manual : the auto image function is switched OFF, no centering, no file load.
When is it disabled ?
The centering of the image will be disabled when :
•
The black edges of the image take more than 25% of the complete image.
•
The connected source is video, s-video, digital video or HDTV.
•
Custom file already exists.
Set up
To set up the Action function :
1. Push the cursor key
↑
or
↓
to highlight Action. (menu 6-4)
2. Press ENTER to toggle between Full automatic, New File or Manual.
Note:
The values of automatically adjusted sources will not be saved.
AUTO IMAGE
ADJUST
ACTION : FULL AUTOMATIC
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 6-4
40
R5976182 BARCOREALITY 6500 30012001