Barco R9001960 - Manual (Page 34)

4. Getting Started
Image 4-3
Lamp run time indication while running
When the total run time of the lamp is 970 hours or more, the following warning message will be displayed. The warning message
will be repeated at the next start up.Press EXIT to remove the message.
When the total run time of the lamp is 1000 hours or more, the following warning message, with the exact run time is displayed on
the screen.
Image 4-4
Lamp run time is 1000 hours. Operating the lamp longer than 1000 hours may damage the projector. Please replace the lamp.
Pressing ENTER allows the user to reset the lamp runtime.
The total lifetime of the lamp for a safe operation is 1000 hours max. Do not use it longer. Always replace with a same type of lamp.
Call a BARCO authorized service technician for lamp replacement.
Using a lamp for more than 1000 hours is dangerous as the lamp could explode.
30 R5976182 BARCOREALITY 6500 30012001