Barco R9001960 - Manual (Page 36)

4. Getting Started
How to change ?
1. Press ENTER to start up the adjustment mode. (menu 4-1)
2. Push the cursor key ↑ or ↓ to highlight Installation.
3. Press ENTER to select. (menu 4-2)
4. Push the cursor key
↑
or
↓
to highlight OSD color.
5. Press ENTER to select.
The OSD color menu will be displayed. (menu 4-3)
6. Push the cursor key
↑
or
↓
to highlight the desired color.
7. Press ENTER to activate.
ADJUSTMENT MODE
Select a path from below :
AUTO IMAGE
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 4-1
INSTALLATION
800 PERIPHERALS
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
SWITCHING MODE : [BLANKING]
SHUTTER
more ...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 4-2
OSD COLOR
HIGHTLIGHTED ITEM
RED
GREEN
YELLOW
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 4-3
4.5 Using the RCU
Pointing to the reflective screen
1. Point the front of the RCU to the reflective screen surface. (image 4-6)
Image 4-6
Pointing the RCU via the screen to the Ir sensor
32 R5976182 BARCOREALITY 6500 30012001