Barco R9001960 - Manual (Page 27)

3. Connections
How to connect a Video source.
1. Connect the video output of your source to the video input of the projector (slot 3). 1 x BNC or cinch 1.0Vpp ± 3 dB. (image 3-6)
Note: No loop through available.
Image 3-6
Video connection to projector
How to select slot 3
1. Key in 3 on the RCU or the local keypad.
3.5.6 S-Video input
What can be connected?
Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals.
How to connect the S-Video signal.
1. Connect the S-video output of your source to the S-video input of the projector (slot 4)
Pin configuration of the mini DIN plug.
1 ground luminance
2 ground chrominance
3 luminance 1.0Vpp ± 3dB
4 chrominance 282 mVpp ± 3dB
How to select slot 4?
1. Key in 4 on the RCU or the local keypad.
3.5.7 SDI input / SDO output
What can be connected ?
Full compatibility with digital Betacam, or digital video sources. This avoids the need for analog processing anywhere in the video
production chain and guarantees the ultimate image quality. An active loop through of the SDI input signal is provided for monitoring
or for double or triple stacking applications.
An active loop through of the SDI input signal is provided for monitoring or for double or triple stacking applications.
R5976182 BARCOREALITY 6500 30012001 23