Barco R9001960 - Manual (Page 86)

9. Service mode
Start Up
1. Push the cursor key
↑
or
↓
to higlight Lamp Run Time History. (menu 9-18)
2. Press ENTER to display the Lamp Run Time overview. (menu 9-19)
A listing with the lamp serial number and the corresponding run time will be displayed.
The actual installed lamp will be marked.
3. Press ENTER to return to the service mode selection menu.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-18
LAMP RUNTIME HISTORY
Serial No Runtime
> 011121 600 h
011098 800 h
011054 1000 h
000000 0 h
000000 0 h
000000 0 h
--------------------------
<ENTER> for detail
<EXIT> to return
Menu 9-19
9.10 Lamp Dimming
What can be done?
The lamp can be dimmed via the lamp dimming feature.
Start Up
1. Push the cursor key ↑ or ↓ to highlight Lamp Dimming. (menu 9-20)
2. Press ENTER to select.
3. Push the cursor key
←
or
→
to dim the lamp.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTIME HISTORY
LAMP DIMMING
MORE...
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-20
A projector starts always with full lamp power.
9.11 BARCO Logo
What can be done?
The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen.
82 R5976182 BARCOREALITY 6500 30012001