Barco R9001960 - Manual (Page 108)

B. BARCO Control Manager
Set up
To set up a mail configuration, handle as follow :
1. Select one of the headings ’Mail 1’, ’Mail 2’ or ’Mail 3’. (image B-15)
2. Fill out the E-mail address with an existing E-mail address.
3. Select the content options by selecting the appropiate options.
The following options are available :
- General Status (contains Projector type, Serial number, Software version, Configuration, Projector runtime, Lamp runtime)
- Job log
- Lamp Warnings
- Advanced diagnostics (contains I²C errors)
4. Fill out the timing options.
Select the desired timing by clicking in the drop down box next to the e-mail address box.
The following options are possible :
- Daily : fill out the exact hour in the at area.
- Weekly : fill out the exact hour in the ’at’ area and select a day (or days) out of the list.
- Montly : fill out the exact hour in the ’at’ area and select the day ot the month in the ’every montly’ area.
5. Click ’Apply’ to finish the configuration.
6. To send an E-mail inmediately, click on ’Send now’.
Image B-15
Mail configuration
Repeat the above steps for the other mail configurations if necessary.
B.5.3 Security
What can be done
The administrator can add or change the advanced user password and the administrator password.
104 R5976182 BARCOREALITY 6500 30012001