Barco R9001960 - Manual (Page 84)

9. Service mode
9.6.2 Projector Address
How to change the projector address?
1. Push the cursor key
↑
or
↓
to higlight Projector Address. (menu 9-12)
2. Press ENTER to select.
The actual address is filled in.
The first digit is highlighted.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-12
How to enter the new projector address?
1. Enter the digits with the digit keys on the RCU or local keypad.
Or ,
push the cursor keys
←
or
→
to select a digit and change the value by pushing the cursor key
↑
or
↓
until the new value is
reached.
Continue with the other digits on the same way. The individual address must be between 0 and 255.
9.6.3 Common Address
How to change a common address?
1. Push the cursor key
↑
or
↓
to highlight the active Common Address. (menu 9-13)
2. Press ENTER to select.
CHANGE PROJ. ADDRESS
Projector address : 1
Common address (RC5) : 0
Common address (PPM) : 0
Select with ↑ or ↓
then <ENTER>
<EXIT> to return.
Menu 9-13
Entering the new common address.
1. Enter with the digit keys on the RCU or the local keypad
Or ,
pushing the cursor key
↑
or
↓
until the new value is reached.
Only addresses between 0 and 1 are valid.
80 R5976182 BARCOREALITY 6500 30012001