Toshiba Magnia Z500 - Manual (Page 115)

Installing and Removing Hardware
Internal battery
96
Replacing the internal battery
Replace the battery in the procedure described below, while refer-
ring to “Before starting operation” on page 46:
1 Write down the system configuration information.
2 Shut down and turn off your server.
3 Unplug the power cable.
NOTE: Don't replace the battery when your server is on, oth-
erwise your server or the internal battery could be damaged.
4 Remove the server panels.
See “Removing and replacing the server panels” on page 52.
5 Push lightly the battery from the side and put your fingers
below the battery, and pull it up.
Removing the battery