Toshiba Magnia Z500 - Manual (Page 146)

External Unit Setup
Installing and Removing Hard Disk Drive (HDD) -SCSI HDD-
127
NOTE: Before pulling out the hard disk drive, make sure that
it is faulty. If a normally operating disk is pulled out by mis-
take, it may damage the server or destroy and lose important
programs or data.
4 While holding the disk tray, carefully remove the hard disk
drive that is pulled out halfway.
Pulling out the hard disk drive
5 Install a new hard disk drive in the same procedure as for
extension.
See “Installing the hard disk drive” on page 122.
6 After a short time, confirm that the DC POWER indicator
( ) lights up.
7 Attach the front panel.
8 Recover (rebuild) the disk.