Toshiba Magnia Z500 - Manual (Page 84)

Installing and Removing Hardware
Removing and replacing the server panels
65
3 Unplug the power cable of the server from the AC outlet or
UPS (uninterruptible power supply).
4 Unplug all the cables from the server.
5 Remove the front panel and loosen the four claw screws which
fix the Base Assembly and draw out the Base Assembly.
Drawing out the Base Assembly
6 When Removing two servers, or a server and a Blank Bracket,
remove two screws (M3) fixing the Rack Bracket and remove
it.
Removing the Rack Bracket
When removing a server and an External Unit, remove the
flat screw (M3) fixing the Base Assembly.
Claw screw
Screw (M3)
Flat screw (M3)
Rack Bracket
Blank Bracket
Front Bracket