Toshiba Magnia Z500 - Manual (Page 83)

Installing and Removing Hardware
Removing and replacing the server panels
64
6 Insert the entire Base Assembly into the rack.
Inserting the entire Base Assembly
7 Fix the housing on the left and right with the claw screws of
Front Bracket (L) and Front Bracket (R), and attach the front
panel.
Fixing the housing on the left and right
8 Connect the cables disconnected.
Sliding the server (Rack Type) out of the rack
Slide the server out of the rack in the procedure described below,
while referring to “Before starting operation” on page 46.
1 If the server is running, shut it down and turn off the power.
2 Switch off all the peripheral units connected with the server.
Claw screw