Toshiba Magnia Z500 - Manual (Page 191)

Installing Software
Windows® 2000 Server
173
Change of the boot priority
Before installing Windows 2000 Server manually, change the boot
priority of CD-ROM Drive by using BIOS Setup Utility to boot
the OS with a CD-ROM.
To change the boot priority, follow these steps:
1 Press the <F2> key on the BIOS menu just after powering on
to start the BIOS Setup Utility and select “CD-ROM Drive” in
the boot menu.
2 Press the <+> to up the boot priority of CD-ROM Drive.
Press the <+> to move the “CD-ROM Drive” on the “+Hard
Drive.”
3 Press the <F10> and then <Enter> to finish the BIOS Setup
Utility.
When the <F10> is pressed, the contents of change are saved
and the system is rebooted.
Selecting the disk driver
Selecting the IDE CD-ROM Controller driver
Use the driver contained on the CD-ROM of the Windows 2000
Server.
+Removable Device
+Hard Drive
CD-ROM Drive
IBA X.XX.XX slot XXXX
IBA X.XX.XX slot XXXX
+Removable Device
CD-ROM Drive
+Hard Drive
IBA X.XX.XX slot XXXX
IBA X.XX.XX slot XXXX