Toshiba Magnia Z500 - Manual (Page 172)

System Configuration Setup
BIOS setup utility
153
! +Hard Drive
Specifies the hard disk drive from which the operating system
is to be booted.
Existing settings are set in the following order:
AIC-7892 (SCIS riser card)
MegaRAID IDE (internal disk drive unit)
PCI RAID Adapter (RAID controller)/PCI-SCSI (SCSI Host
adapter)
In the case of an internal disk drive unit and an external disk
unit configuration, move the disk you want to start to the
uppermost row.
! CD-ROM Drive
Boots from CD-ROM Drive.
! IBA X.XX.XX
Boots from network.
This item appears only when LAN of PCI Configuration in
Advanced menu is set to “Enabled” and the server starts.
Exit menu
! Exit Saving Changes
Saves changes and restarts the system. Performs the same
function as pressing the F10 key.
! Exit Discarding Changes
Discards all recent configuration changes, then restarts the
server. (Except for date, time and passwords)
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes