Philips AVENT Vigilabebés DECT - Manual (Page 10)

10
2
To switch off the projector before the set
time has elapsed, press the projector on/off
button again.
• The pattern projected fades out and the
projector switches off.
• The projector symbol disappears from the
display.
5.4 Paging the parent unit
If you have lost the parent unit, you can use the
FIND button on the baby unit to locate the
parent unit.
D Note:
The paging function only works when the parent
unit is switched on.
1
Press the FIND button on the baby unit.
• The message ‘PAGING’ appears on the
display of the parent unit and the parent
unit produces a paging alert tone.
2
To stop the paging alert tone, press the FIND
button on the baby unit again or press any
button on the parent unit.
D Note:
The paging alert tone stops automatically after
2 minutes.
5.3 Projector
You can soothe your baby with coloured light patterns
projected on the ceiling by switching on the projector.
1
Press the projector on/off button to switch on
the projector.
• The projector symbol appears on the display
of the parent unit.
• The first pattern from the projector fades in
to full intensity in 2 seconds. It is projected
for 8 seconds and then fades out for 2
seconds while the next pattern fades in.
• There are six different patterns and
each pattern is projected for 10 seconds.
When all six patterns have been shown,
the projector starts with pattern 1 again.
The patterns are repeated for the set time
(see ‘Projector’ in chapter ‘Functions and
feedback on the parent unit’).