Philips AVENT Vigilabebés DECT - Manual (Page 9)

9
2
Press the next lullaby button to select
another lullaby from the list.
• If no lullaby is playing, the last selected
lullaby starts playing when you press the
next lullaby button .
• When you press the next lullaby button
while a lullaby is playing, the next lullaby
starts playing.
3
To adjust the sound level of the lullaby, press
the volume + or the volume – button on the
baby unit.
D Note:
You can only set the loudspeaker volume on
the baby unit when a lullaby is playing. If you
have set the volume for the lullaby higher on
the baby unit, the sound will also be louder
when you use the talk function on the parent
unit.
4
To stop lullaby playing before the set time has
elapsed, press the lullaby play/stop button K
on the baby unit.
5 Functions and
feedback on the
baby unit
5.1 Nightlight
The nightlight produces a soft glow that comforts
your baby.
1
Press the nightlight on/off button on the baby
unit to switch on the nightlight.
• Q appears on the display of the parent unit.
2
Press the nightlight on/off button again to
switch off the nightlight.
• The nightlight dims gradually before it goes
out completely.
• Q disappears from the display of the parent
unit.
5.2 Lullaby function
1
Press the lullaby play/stop button K on the
baby unit to play the last selected lullaby.
• The selected lullaby repeats for the set time.
• If no lullaby was selected before, lullaby
1 is played.
ENGLISH