Philips AVENT Vigilabebés DECT - Manual (Page 23)

23
3
Use the + and - buttons to set the minimum
humidity range between 20% and 50%. Press
OK to confirm.
• The maximum humidity indication starts
flashing on the display.
4
Use the + and - buttons to set the
maximum humidity range between 51% and
70%. Press OK to confirm.
5
Select ‘Alert’ with the + and - buttons. Press
OK to confirm and to start setting the
humidity alert option.
6
Use the + and - buttons to select one of the
alert options. The options available are sound
only, sound and vibration, vibration only and
display only. Press OK to confirm.
• After you have confirmed your choice of
the alert option, the humidity alert symbol
appears on the display.
• If the humidity is below the set range, the
humidity alert symbol and the humidity
measured flash on the display. The message
‘TOO DRY’ appears on the display.
• If the temperature is above the set range,
the temperature alert symbol on the
display has three segments and flashes. The
message ‘TOO HOT’ appears on the display.
7.6 Humidity
The optimal humidity level is between 40%
and 60%. It is very important to maintain the
correct humidity level as it helps to protect your
baby from irritation of the mucous membranes,
dry and itchy skin, chapped lips and a dry, sore
throat. When the mucous membranes do not
function optimally, they cannot give your baby full
protection from all kinds of germs. This increases
the chance of your baby catching a cold or the
flu, and reduces its resistance to infections from
mould and bacteria. You can set a humidity range
and an alert to warn you that the humidity is
outside the set range.
1
Select ‘Humidity’ in the menu with the + and -
buttons and press OK to confirm.
2
Select ‘Hum Range’ with the + and - buttons
and press OK to confirm.
• The minimum humidity indication starts
flashing on the display.
ENGLISH