Philips AVENT Vigilabebés DECT - Manual (Page 14)

14
6.2 Volume
The volume can be set if the menu is not active.
There are seven volume levels and a ‘volume off’
setting.
6.2.1 Setting the volume level
1
Press the + button or the - button once.
• The current volume level appears on the
display.
2
Press the + button to increase the volume or
press the - button to decrease the volume.
• The parent unit beeps at every volume step
• At maximum volume, the parent unit gives
two beeps.
• If no button is pressed for more than
2 seconds, the volume level indication
disappears and the volume setting is saved.
6.2.2 Volume off
Below the lowest volume setting, there is a
‘volume off’ setting.
1
Press the + button or the - button once.
• The current volume level appears on the
display.
2
Press and hold the - button for more than
2 seconds to set the volume to off.
• The message ‘MUTE’ and the mute symbol
appear on the display.
1
To select the projector feature, use the + and
- buttons to move the arrow to above the
projector symbol and press OK to switch the
projector on or off.
2
To open the menu with projector options,
point the arrow at the options field and press
OK to confirm.
3
You can set the projector timer for 5 to 20
minutes or you can switch the projector on
continuously. Press OK to confirm.
• If you switched on the projector, the
projector symbol is visible on the parent unit
display when you leave the soothing screen
by pressing the soothing button.
• If you set the projector timer, the projector
switches off automatically and the projector
symbol disappears from the parent unit
display after the time set.
• If you switch on the projector continuously,
you have to switch off the projector in the
soothing screen. This makes the projector
symbol disappear from the parent unit
display.