4 feed timer – Philips AVENT Vigilabebés DECT User Manual

Page 21

Advertising
background image

21

6

When the timer has reached 00:00, the feed

timer alert goes off, the timer symbol starts

flashing on the display and the message

‘TIMER END’ scrolls across the display.

7

Press any key to stop the alert. If you do not

stop the alert, it stops automatically after 2

minutes.

7.4.2 Setting the feed timer alert

1

After step 5 in ‘Setting and using the feed

timer’, select ‘Timer Alert’ with the + and -

buttons. Press OK to confirm.

2

Use the + and - buttons to choose one of the

alert options. The options available are sound

only, sound and vibration and vibration only.

Press OK to confirm.

3

Select ‘xx:xx Start’ with the + and - buttons

and press OK to activate the feed timer

function.

4

When the feed timer alert goes off, press any

key to stop the feed timer and the feed timer

alert.

7.4.3 Repeat the feed timer

1

After step 5 in ‘Setting and using the feed

timer’ or after setting the feed timer alert,

The Eco Max indication flashes on the

display. The ‘link’ light flashes green slowly.

When the parent unit receives a signal from

the baby unit because the baby makes a

sound, the ‘link’ light turns solid green again.

7.3.3 Deactivating Eco Max mode

1

Press the MENU button

2

Use the + and - buttons to select ‘Eco Max’

and press OK to confirm.

3

Use the + and - buttons to select ‘Turn Off’

and press OK to confirm.

7.4 Feed timer

You can set the feed timer to alert you that it is

time to feed your baby. The timer can be set from

1 minute to 23 hours and 59 minutes.

7.4.1 Setting and using the feed timer

1

Select ‘Feed Timer’ in the menu with the +

and - buttons and press OK to confirm.

2

Select ‘Set Timer’ with the + and - buttons and

press OK to start setting the timer.

The hour indication starts flashing on the

display.

3

Set the hour and press OK to confirm.

The minutes indication starts flashing on the

display.

4

Set the minutes and press OK to confirm.

5

Select ‘xx:xx Start’ with the + and - buttons.

Press OK to confirm.

The timer symbol appears on the display.

The timer starts counting down.

ENGLISH

Advertising
This manual is related to the following products: