Philips AVENT Vigilabebés DECT - Manual (Page 22)

22
• The maximum temperature indication starts
flashing on the display.
4
Use the + and - buttons to set the
maximum temperature range between
22°C/72°F and 37°C/99°F. Press OK to
confirm.
5
Select ‘Alert’ with the + and - buttons. Press
OK to confirm and to start setting the
temperature alert option.
6
Use the + and - buttons to select one of the
alert options. The options available are sound
only, sound and vibration, vibration only and
display only. Press OK to confirm.
• After you have confirmed your choice of the
alert option, the temperature alert symbol
appears on the display.
7
Select ‘Temp Scale’ with the + and - buttons.
Press OK to confirm and to start setting the
temperature scale.
8
Select ‘Celsius’ or ‘Fahrenheit’ and press OK to
confirm.
• The temperature in the set scale appears
on the display. If the temperature is within
the set range, the temperature alert symbol
has two segments.
• If the temperature is below the set range,
the temperature alert symbol on the
display has only one segment and flashes.
The message ‘TOO COLD’ appears on the
display.
select ‘Timer repeat’ with the + and - buttons.
Press OK to confirm.
2
Choose ‘Repeat ON’ or ‘Repeat OFF’ and
press OK to confirm.
3
Select ‘xx:xx Start’ with the + and - buttons
and press OK to activate the feed timer
repeat function.
• Instead of the normal timer symbol, the
timer repeat on symbol appears on the
display.
4
When you press any key to stop the feed
timer alert or if the alert stops automatically
after 2 minutes, the feed timer starts counting
down again.
7.4.4 Stopping the timer
1
Press the menu button and select ‘Feed Timer’.
2
Use the + and - buttons to select ‘Stop &
Reset’ and press OK to confirm.
7.5 Temperature
A baby sleeps comfortably at a temperature range
between 16°C/61°F and 20°C/68°F. You can set
a minimum and maximum temperature range
and an alert to warn you that the temperature is
outside the set minimum and maximum range.
1
Select ‘Temperature’ in the menu with the +
and - buttons and press OK to confirm.
2
Select ‘Temp Range’ with the + and - buttons
and press OK to confirm.
• The minimum temperature indication starts
flashing on the display.
3
Use the + and - buttons to set the minimum
temperature range between 10°C/50°F and
19°C/66°F. Press OK to confirm.