Brother 882-S90/S91 - Manual (Page 102)

SEWING THE STITCHES
U
tili
ty
S
tit
ch
es
91
3
■ Attaching 4 Hole Buttons
Sew the two holes closest to you. Then raise the
presser foot and move the fabric so that the needle
goes into the next two holes, and sew them in the
same way.
■ Attaching a Shank to the Button
a
Pull the shank lever toward you before
sewing.
a Shank lever
b
Pull the two ends of the upper thread
between the button and the fabric, wind
them around the shank, and then tie them
firmly together.
c
Tie the ends of the bobbin thread from the
beginning and end of sewing together on
the wrong side of the fabric.
a
Note
• When sewing is completed, be sure to return
the feed dog position switch to its original
position.
a Feed dog position switch
a