Brother 882-S90/S91 - Manual (Page 224)

ADJUSTING THE SCREEN
Ap
pe
ndi
x
213
8
c
Using the included touch pen, lightly touch
the center of each +, in order from 1 to 5.
* If the buzzer sounds one time after you press
number 5, the operation is finished. If the buzzer
sounds twice, there was an error. In this case, repeat
the steps above.
d
Turn the main power to OFF, then turn it
back to ON.
Note
• Only use the included touch pen to touch the
screen. Do not use a mechanical pencil, pin,
or other sharp object. Do not press strongly
on the screen. Otherwise, damage may
result.
Note
• If you finish the screen adjustment and the
screen still does not respond, or if you can-
not do the adjustment, contact your autho-
rized dealer.
+1 +4
+2
+5
+3