Brother 882-S90/S91 - Manual (Page 178)

USING THE MEMORY FUNCTION
Embr
oi
de
ry
167
5
b
Select the pattern you want to delete.
c
Press .
a Amount of memory used by the pattern to be
deleted
b Amount of memory needed to save the current
pattern
d
Press .
* If you decide not to delete the pattern, press
.
→ The “Saving” screen displays. When the pattern is
saved, the display returns to the original screen
automatically.
a
b
Note
• Do not turn the main power to OFF while the
“Saving” screen is displayed. You will lose
the pattern you are saving.
Memo
• If there is enough memory available after
deleting the pattern, the pattern you want to
save will be saved automatically. If there is
not enough memory available after deleting
the pattern, repeat the steps above to delete
another pattern from the machine’s memory.
• It takes a few seconds to save a pattern.
• See page 170 for more information about
retrieving saved patterns.