Brother 882-S90/S91 - Manual (Page 65)

SEWING THE STITCHES
54
a
Select a stitch.
b
Attach presser foot “J”.
c
Hold the thread tails and fabric with your
left hand, and turn the handwheel with
your right hand to insert the needle into the
fabric.
a Sewing start position
d
Lower the presser foot, and hold the
“Reverse/Reinforcement Stitch” button to
sew 3-4 stitches.
→ The machine sews reverse stitches (or reinforcement
stitches).
e
Press the “Start/Stop” button to sew
forward.
a Reverse stitches
→ The machine will begin sewing slowly.
f
When sewing is completed, hold the
“Reverse/Reinforcement Stitch” button to
sew 3-4 reverse stitches (or reinforcement
stitches) at the end of the seam.
g
After sewing, press the “Thread Cutter”
button to trim the threads.
a
a
CAUTION
Be sure the needle does not strike a basting pin, or
any other objects, during sewing. The thread
could tangle or the needle could break, causing
injury.
Memo
When the automatic thread cutting and auto-
matic reinforcement stitch keys on the screen
are selected, reverse stitches (or reinforce-
ment stitches) will be sewn automatically at
the beginning of sewing when the “Start/Stop”
button is pressed. Press the “Reverse/Rein-
forcement Stitch” button to sew reverse
stitches (or reinforcement stitches) and trim
the thread automatically at the end of sewing.