Brother 882-S90/S91 - Manual (Page 36)

UPPER THREADING
G
etting
Re
ad
y
25
1
UPPER THREADING
Threading Using the “Automatic
Threading” Button
Press
→
→ →
in that order to display a video example of
the operation on the LCD (see page 18). Follow
the steps explained below to complete the
operation.
a
Turn the main power to ON.
b
Press the “Needle Position” button to raise
the needle.
c
Pivot the spool pin so that it angles upward.
Set the thread spool on the spool pin so that
the thread unwinds from the front of the
spool.
a Spool pin
b Spool cap
c Thread spool
d
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
CAUTION
• Be sure to thread the machine properly.
Improper threading can cause the thread to
tangle and break the needle, leading to injury.
• When using accessories not included with this
machine, attach the accessory to the machine
after threading the machine.
Memo
• The automatic threading function can be
used with sewing machine needles 75/11
through 100/16.
• Thread such as transparent nylon monofila-
ment thread and thread with a thickness of
130/20 or thicker cannot be used with the
automatic threading function.
• The automatic threading function cannot be
used with the wing needle or the twin nee-
dle.
• If the automatic threading function cannot be
used, see “Threading Manually” on page 27.
7
6
2
3, 4
8
5
1
Note
If you try to thread the needle automatically
without raising the needle, the thread may not
thread correctly.
CAUTION
• If the thread spool and/or spool cap are set
incorrectly, the thread may tangle on the spool
pin and cause the needle to break.
• Use the spool cap (large, medium, or small)
that is closest in size to the thread spool. If a
spool cap smaller than the thread spool is
used, the thread may become caught in the slit
on the end of the spool and cause the needle
to break.
b
c
a