Brother 882-S90/S91 - Manual (Page 155)

CONFIRMING THE PATTERN POSITION
144
CONFIRMING THE PATTERN POSITION
The pattern is normally positioned in the center of the embroidery frame.
You can check the layout before starting embroidery and change the position.
Checking the Pattern Position
The embroidery frame moves and shows the
pattern position. Watch the frame closely to make
sure the pattern will be sewn in the right place.
a
Press .
→ The following screen is displayed.
b
From , press the key for the position
that you want to check.
a Selected position
→ The needle will move to the selected position on the
pattern.
Memo
To see the entire embroidering area, press
. The embroidery frame moves and
shows the embroidery area.
CAUTION
• Make sure the needle is up when the
embroidery frame is moving. If the needle is
down, it could break and result in injury.
a