Brother 882-S90/S91 - Manual (Page 233)

ERROR MESSAGES
222
■ Alarm Sounds
If the operation procedure was correct, the machine
will beep once. If the operation procedure was
incorrect, the machine will beep twice or four times.
This message is displayed when
replacing the embroidering
bobbin thread.
This message is displayed when
a border pattern is displayed in
the embroidery edit screen after
being displayed in the sewing
screen.
This message is displayed when
you try to use incompatible USB
media.
This message is displayed when
it seems that the upper thread
has not been threaded correctly.
This message is displayed when
is pressed (the
presser foot is raised).
This message is displayed when
the automatic needle threading
button is pushed while twin
needle sewing is set.
This confirmation message
appears after the machine is
turned on and the carriage of the
embroidery unit has moved to its
initial position.
Memo
If you want to turn the alarm off, press
. See page 12 for more details.