Brother 882-S90/S91 - Manual (Page 33)

LOWER THREADING
22
d
Push the spool cap onto the spool pin as far
as possible, then return the spool pin to its
original position.
e
Holding the thread with your hands, slide
the thread into the grooves on the thread
guide plate.
a Thread guide plate
f
Pass the thread through the thread guide.
a Thread guide
g
Pass the thread under the pin. Then pass the
thread around the pretension disk making
sure that the thread is under the pretension
disk.
a Thread guide
b Pin
c Pretension disk
h
Follow steps
g
through
j
on page 20
through 21.
Setting the Bobbin
Press
→
→ →
in that order to display a video example of
the operation on the LCD (see page 18). Follow
the steps explained below to complete the
operation.
a
Press the “Presser Foot Lifter” button to
raise the presser foot.
b
Slide the bobbin cover latch to the right.
a Bobbin cover
b Latch
→ The bobbin cover opens.
c
Remove the bobbin cover.
d
Hold the bobbin with your right hand and
hold the end of the thread with your left
hand.
a
a
a
b
CAUTION
• Use a bobbin thread that has been correctly
wound. Otherwise, the needle may break or
the thread tension will be incorrect.