Fluid Management 53PD Blendorama User Manual - Manual (Page 21)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Blendorama Dispenser | 19
e. Release the nozzle lever.
f. Repeat this process until the colorant emerges
as a steady stream.
4
Check the effectiveness of the purge
a. Open the nozzle lever without operating the
pump. A small drop of colorant will appear at the
nozzle.
b. Release the valve lever slowly and the drop will
withdraw into the nozzle.
Repeat this process 10 times. If the drop of
colorant at the nozzle grows appreciably with
each opening of the nozzle lever and/or it drops
from the nozzle into the container, then air is
still in the system and steps 2 and 3 should be
repeated.
c. Repeat this process for all canisters.
Basic Operation
First time operation (continued)