Fluid Management 53PD Blendorama User Manual - Manual (Page 23)


Fluid Management Customer Service 1 . 800 . 462 . 2466 Blendorama Dispenser | 21
4
Set the gauges
a. According to the setting required, operate the
spring loaded button to release the gauge. The
red knob is for the red gauge and the black knob
is for the black gauge.
b. With the appropriate button operated, lift the
gauge to the reading required.
c. The correct gauge setting is shown when the
figure selected is fully exposed above the red
handle and the gauge release button clicks
firmly into place.
5
Charge the pump
a. With the gauges correctly set, slowly and gently
lift the red pump handle until both red and black
handles are against the appropriate gauge
knobs.
b. Continue to hold this for a few seconds to
ensure the pump is correctly filled with colorant.
Basic Operation
General use of the dispenser (continued)