Fluid Management 53PD Blendorama User Manual - Manual (Page 24)

22 | Blendorama Dispenser

Fluid Management Customer Service 1 . 800 . 462 . 2466
6
Discharge the pump
a. While still holding the pump handle in the raised
position, pull the spring-loaded valve lever (at
the base of the pump) forward its full travel
b. Holding the valve lever fully forward, press the
red handle down with a smooth and steady
stroke until the red handle is fully depressed.
c. Ensure that both the red and black handles are
fully depressed against the end cap. All the
colorant has now be discharged and the valve
lever can be released.
d. Repeat the charging and discharging process for
each colorant specified in the formula.
Basic Operation
General use of the dispenser (continued)