Fluid Management Miller GyroMixer - Manual (Page 5)

SAFETY INFORMATION
GyroMixer End User Guide 1
SAFETY
INFORMATION MIXER WARNING LABELS
You should become familiar with important warning labels which are affixed to the
mixer, as well as the symbols which appear throughout this manual. These
warnings have been included to help you safely perform your job.
Please read all warning labels that are on the mixer. Keep them clean so they are
easy to read. If the warning labels become damaged or unreadable, new labels can
be purchased from Fluid Management. See the parts list in the back of the manual
for ordering information.
SAFETY NOTICE INFORMATION
The two main safety notices used in this manual are Warning and Caution.
Notices in this manual will look like the example below.
Warning Notice
WARNING ELECTRICAL HAZARD
Do not operate the mixer with the door open.
Disconnect power before servicing.
A Warning notice tells you about a hazard that could cause serious injury to you or
extensive damage to the mixer. This information is placed at the beginning of the
manual to emphasize the importance of safety to your well being.
When you see a Warning notice in this manual, read it carefully. Before continuing
with the operation of the mixer, take all necessary precautions to avoid potential
injury.
Caution Notice
CAUTION ELECTRICAL HAZARD
All electrical components must be kept dry.
Never place containers of liquid on or near the
control box.
A Caution notice tells you about a danger that could cause injury to you or minor
damage to the mixer. When you see a Caution notice in this manual, read it
carefully and be sure you understand it before continuing.